Pumps

Design: Vertical,single-stage submersible motor pump, for wet installation, stationary and transportable design.

Applications: Handling of all types of waste water,especially untreated sewage containing long fibres and solid substances, fluids containing gas/air, as well as raw, activated and digested sludge, dewatering/water extraction, drainage of rooms and surfaces subject to a flooding risk.

KSB offers a wide variety of pumps and mixers to handle every municipal application..........
Submersible Pumps
KRT - Wet Pit Submersible		Submersible motor pump 2" - 28"
	Size — 2" - 28" Q (gpm) — up to 45,000 H (ft) — up to 330 T (°F) — up to 140 P (hp) — up to 1,080	Design: Vertical,single-stage submersible motor pump, for wet installation, stationary and transportable design. Applications: Handling of all types of waste water,especially untreated sewage containing long fibres and solid substances, fluids containing gas/air, as well as raw, activated and digested sludge, dewatering/water extraction, drainage of rooms and surfaces subject to a flooding risk.
For more product information

KRT - Dry Pit Submersible		Submersible motor pump 4" - 28"
	Size — 4" - 28" Q (gpm) — up to 45,000 H (ft) — up to 330 T (°F) — up to 140 P (hp) — up to 1,080	Design: Vertical, single-stage submersible motor pump in close-coupled design,various impeller types,dry installation. Applications: Handling of all types of waste water in waste water engineering and industry, especially sewage containing long fibres and solid substances, fluids containing gas/air, as well as raw,activated and digested sludge.
For more product information

Amacan K		Submersible motor pump with non-clogging impeller
	Size — 28" - 56" Q (gpm) — up to 30,000 H (ft) — up to 90 T (°F) — up to 104 P (hp) — up to 400	Design: Wet-installed submersible motor pump with non-clogging impeller, single-stage,single-entry, for installation in discharge tubes, explosion protection to FM, Explosion proof to Class I, Division 1, Groups C & D. Applications: Handling of pre-cleaned, chemically neutral waste water, industrial effluents and sewage, fluids not containing any stringy substances pre-treated by screens and sills, as waste water, mixed water and activated sludge pump in effluent treatment plants, irrigation and drainage pumping systems.
For more product information

Mixers/agitators/tank cleaning units
Amamix		Submersible mixer
	Propeller Diaz. — 8" - 24" Q (gpm) — up to 2,359 RPM — up to 1,750 T (°F) — up to 104 P (hp) — up to 13.4	Design: Horizontal submersible mixer with self-cleaning ECB propeller, close-coupled design, direct drive, explosion protection to FM, Explosion proof to Class I, Division 1, Groups C & D. Applications: Mixing, homogenizing and thickening of municipal and industrial waste water and sludge.
For more product information

Amamix		Submersible mixer
	Propeller Diaz. — 20" - 32 " Q (gpm) — up to 26,900 RPM — up to 460 T (°F) — up to 104 P (hp) — up to 20	Design: Horizontal submersible mixer with self-cleaning ECB propeller, close-coupled design, gear drive, explosion protection to FM, Explosion proof to Class I, Division 1, Groups C & D. Applications: Mixing, homogenizing and thickening of municipal and industrial waste water and sludge.
For more product information

Amaprop		Submersible agitator
	Propeller Dia. — 48" - 100 " Q (gpm) — up to 76,188 RPM — up to 110 T (°F) — up to 104 P (hp) — up to 8.6	Design: Horizontal submersible agitator with self-cleaning ECB propeller, close-coupled design, equipped with coaxial spur gear, explosion protection to FM, Explosion proof to Class I, Division 1, Groups C & D. Applications: Circulating, keeping in suspension and dispersing of municipal and industrial waste water and sludge.
For more product information

Amaline		Submersible motor recirculation pump
	Size — 12" - 32" Q (gpm) — up to 22,600 H (ft) — up to 10 T (°F) — up to 104 P (hp) — up to 20	Design: Wet-installed, horizontal propeller pump with submersible motor, equipped with spur gear or direct drive, ECB propeller with 3 rigid, fibre-repellent blades, bolt free connection to the discharge pipe, explosion protection to FM, Explosion proof to Class I, Division 1, Groups C & D. Applications: Recirculation of activated sludge in waste water treatment systems.
For more product information

Pumps for solids-laden fluids/positive displacement pumps
Sewatec/Sewabloc		Dry-installed volute casing pump
	Size — 2" - 20" Q (gpm) — up to 15,000 H (ft) — up to 320 T (°F) — up to 158 PSI — up to 145	Design: Horizontal or vertical volute casing pump with free-flow (F), single vane(E), multi-vane (K) and diagonal single vane (D) impellers, discharge flange to DIN and ANSI standards. Design to FM, Explosion proof to Class I, Division 1, Groups C & D. Applications: Handling of sewage and all types of waste water in waste water management and industry.
For more product information

SPY		Dry-installed volute casing pump
	Size — 14" - 48" Q (gpm) — up to 90,000 H (ft) — up to 165 T (°F) — up to 220 PSI — up to 145	Design: Long-coupled, single-stage volute casing pump in back pull-out design. The dimensioned shaft and bearings make for smooth operation and consequent low loading of the entire pump. Applications: Drainage, irrigation and water supply systems, handling of condensate, cooling water, service water, etc.
For more product information