KSB - Because you know what you're doing. Energy Moves The World...

We have a full range of pumps, motors and systems for building or upgrading power stations and district heating systems. You'll hear the name KSB around every new power plant being built.
Standardized/close-coupled pumps, fixed/variable speed
Etanorm/Etanorm R  
Standardized cast iron pump
Size        —  1.25" - 12 "
Q (gpm) —  up to 8,366
H (ft)      —  up to 335
PSI        —  up to 232
T (°F)     —  up to 284
RPM       —  up to 3,500
Design: Horizontal, long-coupled, single-stage volute casing pump (pump size >125 with two stages) in back pull-out design, with replaceable shaft sleeves/shaftprotecting sleeves and casing wear rings. Design to ATEX.

Applications: Spray irrigation, irrigation, drainage, district heating, water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, handling of hot water, cooling water, fire-fighting water, oil, brine, drinking water, brackish water, service water, etc.
For more product information
 
Etabloc  
Close-coupled cast iron pump
Size        —  1" - 6"
Q (gpm) —  up to 3,258
H (ft)      —  up to 318
PSI        —  up to 232
T (°F)     —  up to 284
RPM       —  up to 3,500
Design: Close-coupled, single-stage volute casing pump, ratings to EN 733, with replaceable shaft sleeve and casing wear rings. Design to ATEX.

Applications: Spray irrigation, irrigation, drainage and water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, handling of hot water, cooling water, fire-fighting water, seawater, oil, brine, drinking water, cleaning agents, brackish water, service water, etc.
For more product information
 
Etachrom BC  
Close-coupled chrome steel pump
Size        —  1" - 3 "
Q (gpm) —  up to 810
H (ft)      —  up to 351
PSI        —  up to 174
T (°F)     —  up to 230
RPM       — up to 3,500
Design: Close-coupled, horizontal, single-stage annular casing pump, with ratings and main dimensions to EN 733, with replaceable casing wear rings. Design to ATEX.

Applications: Spray irrigation, irrigation, drainage and water supply systems, heating and air-conditioning systems, fire-fighting systems, swimming pools, handling of condensate, hot water, cooling water, fire-fighting water, oil, drinking water, cleaning agents, service water.
For more product information
Etachrom NC  
Standardized chrome steel pump
DN         —  1" - 3"
Q (gpm) —  up to 581
H (ft)      —  up to 351
PSI        —  up to 174
T (°F)     —  up to 230
RPM       —  up to 3,500
Design: Horizontal, single-stage annular casing pump, with ratings and main dimensions to EN 733, with replaceable casing wear rings. Design to ATEX.

Applications: Water supply, spray irrigation, irrigation and drainage systems, heating and air-conditioning systems, handling of drinking water, service water, hot water, cooling water, swimming pool water, fire-fighting water, condensate, oil and cleaning agents.
For more product information
Hot water pumps
HPK-L  
Hot water recirculation pump without external cooling
DN         —  1" - 6 "
Q (gpm) —  up to 2,025
H (ft)      —  up to 312
PSI        —  up to 580
T (°F)     —  up to 464
RPM       — up to 3,500
Design: Horizontal, radially split volute casing pump in back pull-out design to EN22 858 / ISO 2858 / ISO 5199, single-stage, single-entry, with radial impeller. Equipped with heat barrier, seal chamber air-cooled by integrated fan impeller, no external cooling. Design to ATEX.

Applications: Handling of hot water in piping or tank systems, particularly in medium-sized and large heating systems, forced circulation boilers, district heating systems, etc.
For more product information
 
HPK  
Hot water recirculation pump
DN         —  1" - 16 "
Q (gpm) —  up to 21,133
H (ft)      —  up to 607
PSI        —  up to 580
T (°F)     —  up to 464 (water)
RPM       — up to 3,500
Design: Horizontal, radially split volute casing pump in back pull-out design to EN22 858 / ISO 2858 / ISO 5199, single-stage, single-entry, with radial impeller. TÜVcertification to TRD on option. Design to ATEX.

Applications: Handling of hot water and thermal oil in piping or tank systems, particularly in medium-sized and large heating systems, forced circulation boilers, district heating systems, etc.
For more product information
 
HPH  
Hot water recirculation pump
DN         —  1.5" - 12 "
Q (gpm) —  up to 7,925
H (ft)      —  up to 738
PSI        —  up to 1,595
T (°F)    —  up to 608
RPM      —  up to 3,500
Design: Horizontal, radially split volute casing pump in back pull-out design, single-stage, single-entry, with centerline pump feet and radial impeller. TÜVcertification to TRD on option. Design to ATEX.

Applications: Handling of hot water in high-pressure hot water generation plants and for use as boiler feed and recirculation pump.
For more product information
Hot water pumps
Etanorm SYA/RSY  
Hot water/thermal oil pump
DN         —  1.25" - 12 "
Q (gpm) —  up to 8,366
H (ft)      —  up to 335
PSI        —  up to 232
T (°F)     —  up to 356 (water)
RPM       —  up to 3,500
Design: Horizontal, long-coupled volute casing pump in back pull-out design with ratings and main dimensions to EN 733, single-stage, with replaceable casing wear rings. Design to ATEX.

Applications: Heat transfer systems (DIN 4754,VDI 3033) or hot water recirculation.
For more product information
Standardized chemical pumps
CPKN  
Hot water/thermal oil pump
DN         —  1" - 16"
Q (gpm) —  up to 20,000
H (ft)      —  up to 700
PSI        —  up to 363
T (°F)     —  up to 752
RPM       —  up to 3,500
Design: Horizontal,radially split volute casing pump in back pull-out design to EN 22 858 / ISO 2858 / ISO 5199,single-stage, single-entry, with radial impeller. Also available as variant with “wet”shaft, conical seal chamber, heatable volutecasing (CPKNO-CHs) and/or semi-open impeller (CPKNO). Design to ATEX.

Applications: Handling of aggressive liquids in the chemical and petrochemical industries as well as in refinery systems, handling of brine.
For more product information
 
CPK-D  
Standardized chemical pump with hydrodynamic shaft seal
DN         —  1.25" - 10 "
Q (gpm) —  up to 6,000
H (ft)      —  up to 700
PSI        —  up to 363
T (°F)     —  up to 302
RPM       —  up to 3,500
Design: Horizontal, radially split volute casing pump in back pull-out design to ISO2858, single-stage, single-entry, with radial impeller and zero-leakage hydrodynamic shaft seal.

Applications: Handling of liquids in the chemical and petrochemical industry, in refineries and paint shops.
For more product information
Process pumps
RPH  
Process pump
DN         —  1" - 10"
Q (gpm) —  up to 6,500
H (ft)      —  up to 886
PSI        —  up to 1,320
T (°F)     —  up to 752
RPM       —  up to 3,500
Design: Horizontal, radially split volute casing pump in back pull-out design to API610, 9th edition, or ISO 13709 (heavy duty), with radial impeller, single-stage, single-entry, centerline pump feet; with inducer, if required.Design to ATEX.

Applications: Refineries, petrochemical and chemical industry, power stations.
For more product information
High-pressure pumps, fixed/variable speed
Movitec V/LHS  
High-pressure in-line pump
DN         — 1" - 4"
Q (gpm) —  up to 396
H (ft)      —  up to 1,362
PSI        —  up to 580
T (°F)     —  up to 248
RPM       —  up to 3,500
Design: Multistage, vertical high-pressure centrifugal pump in ring-section design with suction and discharge nozzles of identical nominal diameters arranged opposite to each other (in-line design), close-coupled. Design to ATEX.

Applications: Spray irrigation, irrigation, washing, water treatment, fire-fighting and pressure boosting systems, hot water and cooling water recirculation, boilerfeed systems, etc.
     
Multitec  
High-pressure in ring-section design
DN         — 1.25" - 6"
Q (gpm) —  up to 4,500
H (ft)      —  up to 2,067
PSI        —  up to 914
T (°F)     —  up to 392
RPM       —  up to 3,500
Design: Multistage horizontal centrifugal pump in ring-section design, long-coupled and close-coupled variant, with axial or radial suction nozzle, cast radial impellers. Design to ATEX.

Applications: Water and drinking water supply systems, general industry, pressure boosting systems, irrigation systems, in power stations, heating, filter, fire-fighting, reverse osmosis and washing plants, snow guns, etc.
Flue Gas Desulphurization
KWPKC  
Slurry pump
DN         —  1.5" - 40 "
Q (gpm) —  up to 80,000
H (ft)      —  up to 460
T (°F)     —  up to 536
RPM       —  up to 1,750
Design: Horizontal, radially split, single-stage volute casing pump back pull-out design.

Applications: Used in the secondary circuits as limestone slurry pump, gypsum slurry extraction pump, recirculation water pump and thickener pump.