KSB - Because you know what you're doing. Energy Moves The World... KSB - Because you know what you're doing. Energy Moves The World... We have a full range of pumps, motors and systems for building or upgrading power stations and district heating systems. You'll hear the name KSB around every new power plant being built. |
| Critical Service Pumps for Power Stations | ||
| CHTA/CHTC/CHTD | Boiler feed pump |
|
 |
Size — 4" - 20" Q (gpm) — up to 16,291 H (ft) — up to 17,389 PSI — up to 8,122 T (°F) — up to 410 RPM — up to 6,750 |
Design: Horizontal, high-pressure barrel-type pump with radial impellers, multi-stage, single-entry, with flanges/weld end nozzles to DIN and ANSI. Applications: Handling of feed water and condensate in power stations and industrial facilities, generation of pressurized water for bark peeling machines and descaling equipment. |
| For more product information | ||
| HGB/HGC/HGD | Boiler feed pump |
|
 |
Size — 1.5" - 16" Q (gpm) — up to 10,127 H (ft) — up to 17,389 PSI — up to 8,122 T (°F) — up to 410 RPM — up to 7,000 |
Design: Horizontal,radially split,multistage ring-section pump with radial impellers,single- or double-entry.
Applications: Handling of feed water and condensate in power stations and indus-trial facilities,generation of pressurized water for bark peeling machines,descaling equipment,snow guns,etc. |
| For more product information | ||
| HGM | Boiler feed pump |
|
 |
Size — 1" - 4" Q (gpm) — up to 1,206 H (ft) — up to 4,593 PSI — up to 2,031 T (°F) — up to 320 RPM — up to 3,600 |
Design: Horizontal, radially split, product-lubricated,multistage ring-section pump with radial impellers, axial and radial single-entry inlet.
Applications: Handling of feed water in power stations, boiler feed water and condensate in industrial facilities. |
| For more product information | ||
| YNK/KRHA | Booster pump |
|
 |
DN — 5" - 24" Q (gpm) — up to 30821 H (ft) — up to 919 PSI — up to 580 T (°F) — up to 410 RPM — up to 1,800 |
Design: Horizontal, radially split, single-stage, double-entry boiler feed booster pump (booster system) with single or double cast steel volute casing.
Applications: Handling of feed water in power stations and industrial facilities. |
| For more product information | ||
| LUV/LUVA/LUVB | Boiler recirculation pump |
|
 |
DN — 4" - 22" Q (gpm) — up to 30,821 H (ft) — up to 902 PSI — up to 4,641 T (°F) — up to 788 |
Design: Vertical spherical casing pump, radial impellers, single- or double-stage, single- entry. Suitable for very high inlet pressures and temperatures. Integrated wet rotor motor to VDE / IEEE specifications. Product-lubricated bearings, no need for oil supply systems. Design to TRD. Applications: Hot water recirculation in forced-circulation, forced-flow and combined-circulation boilers for very high pressures. Waste heat recovery in steel works. |
| WKT/WKTA/WKTB | Condensate pump |
|
 |
DN — 1.5" 13" Q (gpm) — up to 7,925 H (ft) — up to 1,115 PSI — up to 580 T (°F) — up to 212 RPM — up to 1,800 |
Design: Vertical, multistage, can-type ring-section pump with radial and mixed flow impellers. Single- and double-entry suction impellers, flanges to DIN or ANSI. The can is arranged in a pit below the installation floor. The pump is connected with the structure by means of a base plate. Applications: Handling of condensate in power stations and energy systems. |
| SEZ/PHZ/PNZ | Cooling water pump |
|
 |
DN — 28" - 94" Q (gpm) — up to 286,195 H (ft) — up to 157 PSI — up to 145 T (°F) — up to 104 RPM — up to 980 |
Design: Vertical tubular casing pump with open mixed flow impeller (SEZ), mixed flow propeller (PHZ) or axial propeller (PNZ). Pump inlet with bell mouth or suction elbow, pull-out design available, discharge nozzle arranged above or below floor, flanges to DIN or ANSI standards available. Applications: Handling of raw,pure,service and cooling water in industry,water supply systems,in power stations and seawater desalination plants. |